Chinese  |   English

 
 
 
 
 

Product introduction: This series of hydraulic deep drawing press uses in various metals product, the suitable industrial is for automobile parts, the electrical appliances, the hardware. And so on .....

 
 
 
   
 
Model   YTD-200B YTD-300B YTD-400B YTD-600B YTD-800B YTD-1000B YTD-1200B YTD-1600B YTD-2000B
Main Capacity TON 200 300 400 600 800 1000 1200 1600 2000
Open Height mm 1300 1500 1600 1800 1800 1900 2000 2200 2200
Stroke mm 1000 1200 1300 1400 1400 1500 1600 1700 1700

Bolster Size

mm 1500x1200 2000x1500 2500x1600 3000x2000 3200x2200 3500x2400 3500x2400 4600x2500 5000x2500
Cushion Capacity TON 65 100 140 200 280 330 400 500 600
Cushion Stroke mm 300 300 300 400 400 500 500 500 500
Cushion Size mm 1200x900 1425x1075 1925x1175 2425x1675 2425x1800 2925x1925 2925x1925 3800x2000 4110x2000
Main Pump   YUKEN YUKEN NACHI NACHI REXROTH REXROTH REXROTH REXROTH REXROTH
Main Motor HP 40 50 60 75 150 175 205 300 400
Cushion Motor HP 7.5 10 30 50 25 30 30 40 50
Pressure kg/cm2 210 210 210 210 242 245 245 245 250
 

Bolster size can be custom ordered with optional mobile bolster move in different directions. Can also be integrated pressure variable flow pump and different types of touch screen to control machine movements to meet customer needs.

 

 
 

1. Cylinder tube and piston roe all with one-piece design to ensure service lifetime, harden rod surface and line ground.
2. The slide and cushion rails use eight guide rail designs (adjustable trueing) and the use self lubricating type Wear-resisting board.
3. The logical equation oil duct return route design, the machine high-speed operation movement is smooth, uses the low noise pump, the low vibration.
4. Overload protection valves.
5. Efficiently designed hydraulic circuit block with less pipes and connection.
6. Programmable logic controller and Japan standard electric components.
7. "Accessible open side-frame suitable for automation equipment front to back or left to right. "
8. The slide and cushion position controlled by limit switch.
9. Front side T-stand Control desk.
10. Interlocked safety die block.
11. Oil temperature readout on the panel.
12. Use the high efficiency oil cooler. (The cooling water piped away by the customer)
13. Uses the pressure switch. (Made in italy)
14. T-slotted slide and bolster.
15. Standard cushion pin. (Surface heat treatment)


 
 

1. The pressure digital display tonnage, easy monitoring of pressure.
2. Mono or Color NC Touch Screen With Absolute Encoders.
3. Front and back safety light curtain.
4. Stand alone oil heat exchanger.
5. Quick Die Chang System (Q.D.C)
6. Punching Damper.
7. Auto lubrication system.

   
 
       

YUNG TEH MACHINERY CO.,LTD
ADDRESS:No.6, Ln. 231, Sec. 1, Fuhua Rd., Luzhu Dist., Taoyuan City 338, Taiwan (R.O.C.)

TEL : 886-3-212-7796、886-3-212-7797
E-mail :
yung.teh8@gmail.com
Design By SOFTINFO